Energy per generated second
Our proprietary scheduling algorithms route inference to chips selected for energy efficiency. We measure energy per successful clip at a fixed preset.
What we measured
In two runs of our five-second, single-image H3 reference preset, board energy was approximately 7.47 to 7.84 watt-hours per clip. That is 1.49 to 1.57 watt-hours per nominal output second. The measurement excludes power-supply losses, network, storage and cooling.
Estimate operational emissions
Multiply kilowatt-hours by the electricity supply’s grams of CO₂e per kilowatt-hour. At an illustrative 400 g/kWh, the measured board energy corresponds to about 3.0 to 3.1 grams of CO₂e per five-second clip. Actual electricity sources differ.
Comparing services
A credible savings percentage needs matched output quality, delivered seconds, system boundaries and an electricity factor for each service. We have yet to measure competitor wall energy for that comparison.